Targa 29 helm control

The place for Fairline discussions!
  • Advertisement

Targa 29 helm control

Postby timrovers » Sun Aug 12, 2018 1:30 pm

Hello
I have a Targa 29. Below the two helm control levers are two pairs of black soft rubber buttons - what do they do ? The dealer didn’t explain very much about the controls, and the ‘manual’ offers no information. Any ideas ?
Thanks.
Tim
timrovers
 
Posts: 6
Joined: Tue Apr 07, 2015 8:59 am

Re: Targa 29 helm control

Postby admin » Mon Aug 13, 2018 8:52 pm

I think they are test buttons for the engine alarms. I don't know why there are pair of them though. Give them a press and see what happens!
Don't forget to Join our new Facebook Group.
Follow us on Twitter.
For Stainless Steel letters and Fender Socks visit Smart Marine.
User avatar
admin
Site Admin
 
Posts: 651
Joined: Sat Feb 15, 2003 3:48 pm

Re: Targa 29 helm control

Postby Malcolm » Wed Aug 15, 2018 1:20 pm

Assuming we are talking ref the two buttons directly below the lever controls.......

These have to be pressed to allow the drive trim to rise above say +6 degrees and into beach range. In other words there is a safety cut out in the electrical system that will NOT allow the drive to rise above a certain figure with the engine running and in gear. Pressing the button and keeping it pressed, "overides" the automatic cut out.

Look on line some where you should be able to download a Volvo Penta instruction book. Which will explain it far better than I have.
Malcolm
 
Posts: 21
Joined: Wed Apr 21, 2004 5:47 pm
Boat: Sealine S34

Re: Targa 29 helm control

Postby timrovers » Mon Aug 20, 2018 1:14 pm

Thank you - I will push them and see what happens.
timrovers
 
Posts: 6
Joined: Tue Apr 07, 2015 8:59 am


Return to Fairline Forum

Who is online

Users browsing this forum: Google [Bot], targacurt and 35 guests

  • Advertisement