Targa 47 Sliding roof drive Gear

OEM / other parts and service suppliers.
  • Advertisement

Targa 47 Sliding roof drive Gear

Postby BIMCA » Sun Feb 04, 2018 1:15 pm

Trend roof drive gear, if your roof is less than smooth it is probably the drive gear, these are about £160 from Trend with about a months wait.
I drive gear inc P & P £75
BIMCA
 
Posts: 6
Joined: Tue Jan 23, 2018 4:57 am
Boat: Targa 47

Re: Targa 47 Sliding roof drive Gear

Postby PeterWKnudsen » Tue May 15, 2018 12:36 pm

My Sliding roof has startet to close very very slowly, but opens at normal speed. Any idea what is wrong?
Should I change the drive gear? Do you have a short instruction on how this is done?
BR
Peter
PeterWKnudsen
 
Posts: 2
Joined: Tue Feb 16, 2016 12:37 pm
Boat: Fairline Targa 47

Re: Targa 47 Sliding roof drive Gear

Postby BIMCA » Sun May 20, 2018 8:22 pm

Apologies for the delay in replying.

I assisisted an engineer named Ian McKenzie and the processs is relatively straightforward if not a little daunting.
I am not an engineer, assuming the motor is OK I would guess that the cable has become blocked and restricted with salt, grease or whatever. Ian was very clear that these cables should only be lubricated with silicone spray.
To deal with this it is almost certainly a full strip apart, clean, check and reassembly.
BIMCA
 
Posts: 6
Joined: Tue Jan 23, 2018 4:57 am
Boat: Targa 47


Return to Part Suppliers and Services

Who is online

Users browsing this forum: Bewise and 1 guest

  • Advertisement