Volvo Penta EVC Shift Problems

The place for Fairline discussions!
  • Advertisement

Volvo Penta EVC Shift Problems

Postby BlueHeaven » Sat Apr 28, 2018 4:44 pm

Hi all. Just wondering if anyone out there can help...

I have a 2010 T38 with D4s. I had a fault on the Port Engine, which would start but not go into gear. The EVC system indicated an EVC fault and, on investigation, the shift cable was very stiff to operate. The actuator would not move, even with the shift cable disconnected, so I replaced it with a new one (£500 - ouch). With the new actuator connected but the shift cable still disconnected I have done an EVC calibration and cleared the fault code, but the actuator still won’t move from the neutral position either ahead or astern. Any ideas, because I’m confused.com!
BlueHeaven
 
Posts: 2
Joined: Mon May 30, 2016 4:08 pm

Re: Volvo Penta EVC Shift Problems

Postby farsco » Sun Apr 29, 2018 7:09 pm

I would post that question here

http://www.ybw.com/forums/forumdisplay. ... Boat-Forum

Chap called volvopaul will know what’s what
farsco
 
Posts: 24
Joined: Tue Aug 09, 2016 8:32 pm

Re: Volvo Penta EVC Shift Problems

Postby BlueHeaven » Tue May 01, 2018 5:14 pm

Many thanks Farsco, I’ll give that a go.
BlueHeaven
 
Posts: 2
Joined: Mon May 30, 2016 4:08 pm


Return to Fairline Forum

Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 28 guests

  • Advertisement
cron