cleaning topsides

The place for Fairline discussions!
Post Reply
York Boater
Posts: 2
Joined: Wed Sep 02, 2009 5:56 pm
Location: Fairline 34

cleaning topsides

Post by York Boater » Mon May 10, 2010 11:29 am

I have a targa 34 and the anti slip parts on the topsides are very dirty with a grime that I can not clean off. Does anuone know what I could use??

User avatar
enterprise
Posts: 175
Joined: Thu Aug 16, 2007 4:29 pm
Location: Targa 28

Post by enterprise » Mon May 10, 2010 2:10 pm

I've had the same, I'm assuming you mean the diamond pattern in the gelcote?

Only thing that seams to work is a stiff nylon bristle deck brush with either starbrite's hull cleaner or Oxalic acid, you need to work it in with the brush and let the cleaners do their job before washing down with plenty of water.

Don't try and make it too shiny though as you loose a certain amount of grip.

ajay
Posts: 183
Joined: Mon Jul 16, 2007 11:07 pm
Location: Targa 30

Post by ajay » Mon May 10, 2010 2:38 pm

Starbright deck cleaner, cheap and I found it works well. If its really stubborn use the deck cleaner making it foamy all over by using with a deck brush then use a power washer like a karcher. setting to lowest pressure first then increasing if needed (keeping away from hatches / ports etc)

MERRELLE
Posts: 54
Joined: Fri Dec 18, 2009 5:22 pm

DIRTY TOPSIDES.

Post by MERRELLE » Wed May 12, 2010 11:19 am

Hello.

Have had the same problem on many grip surfaces and used all the
usual expensive brands.

I ran out and only had some tesco spray bleach,?1.99 left it on for 5/6 mins brush and power blast.

worth a try

Roger

Post Reply