Page 4 of 4

Re: Fairline Turbo 36 restoration

PostPosted: Tue May 15, 2018 2:51 pm
by Murv
TurboRoss wrote:This is interesting reading , as I noticed that my port engine runs slightly hotter than the starboard one. Not by much but you can see the gauges are different .

The chap looking after the engines has said let’s get it all serviced up & see how it goes from there .

I hope it’s nothing serious!!

750 hrs on these motors but no idea if that’s acuurate , what sort of hours can you expect out of the volvos ?


I had a fishing boat engine , a 90hp John Deere make 15,000 hrs on the clocks and still was going strong !

Ross


Not sure you'll really get an answer on that, the debates seem to rage on with no concrete answers!
I personally don't even think about it, mine are on 1500 hours and in very good shape, don't use oil etc.

I use to drive a Volvo FL6 which is the engine that these are (apparently) based on. I'm sure in the lorries they're lower power output but mine had done 250,000 miles when I got it and it got absolutely hammered day in, day out for 5 years with absolutely no ill effects.
I've been reliably informed that the TAMD6 series of engines are some of the best engines that Volvo ever made so I'm sure that corrosion and lack of use is far more of an issue than ever wearing the things out 8)

Re: Fairline Turbo 36 restoration

PostPosted: Wed May 16, 2018 3:22 pm
by TurboRoss
Hi

Thats good to know and i'm familiar with trucks as we operate a transportation business, so I know what sort of mileage those FL6's can reach. I've driven plenty too !

Thats reassuring to know !

I just retuned home from a full day on the boat, this time I've changed door handles amongst a whole host of other things . Again you won't believe how heavy and robust the old ones are . They come off easy and have been replaced by B&Q polished stainless steel ones at £18 each. Ive fitted one and photographed it for reference (pics to follow) , but the door is changing colour so its coming off again.

I can't imagine how many hours work we've put into the boat already .

Ross

Re: Fairline Turbo 36 restoration

PostPosted: Thu May 17, 2018 1:58 pm
by Severn
TurboRoss wrote:This is interesting reading , as I noticed that my port engine runs slightly hotter than the starboard one. Not by much but you can see the gauges are different .


At displacement speed I have had one engine running warmer than the other by about 8 degrees for a while.

After taking the boat for a test run now I have cleared and de-scaled the cooling system the starboard engine was still running warmer than the port. Yesterday I took off and checked that the exhaust elbow was not starting to block up but it was clear so were the little slots where the water is sprayed into the exhaust so it didnt look like a water flow issue. Today I decided for the sake of £100 quid on parts I would change the thermostat. I have got it out and it looks like somone in the past has changed it and used the wrong one. The part number on the thermostat that I have taken out shows it is for a different engine and it opens at 82 degrees where the one on the TAMD61a should open at 75 degrees. This explains why the engine is running about 8 degrees warmer than the other! I have just orderd the new thermostat, seals, gaskets and a few new bolts. Now its the bit I hate, waiting for them to arrive.

Re: Fairline Turbo 36 restoration

PostPosted: Wed May 23, 2018 7:15 pm
by TurboRoss
good day

Well another good day onboard the restoration project ! :lol:

Today we've finished off the galley , sealed it all up, made up some new hand rails in the same material as the worktops, and removed the STB aft hand rails and re bedded it all back in with shiny new stainless washers . Unlike the ones that came with the boat , the washers were non existent !!

Gaining access to the aft heads bolts meant drilling through the roof fixtures , as pictured !

Thats another job ticked off the list and onto the next

Ross :?

Re: Fairline Turbo 36 restoration

PostPosted: Wed May 23, 2018 7:19 pm
by TurboRoss
Here we are again with the latest galley pics !

Looking good and coming on nicely ...

Ross

Re: Fairline Turbo 36 restoration

PostPosted: Thu May 24, 2018 4:16 am
by Murv
I have to say that this thread is officially my favourite thing on the internet, ever!
Nicely done sir, keep the pictures flowing! And doesn't the aft deck look odd without the rails and dodgers!

Re: Fairline Turbo 36 restoration

PostPosted: Fri May 25, 2018 5:03 pm
by Severn
What a transformation. Great to see it all coming together.

Re: Fairline Turbo 36 restoration

PostPosted: Fri Aug 03, 2018 7:16 pm
by TurboRoss
Good day all ...

Been a while since i last posted , but all is coming along fine. Im actually using the boat now here and there , taking it out for good runs to let the motors stretch their legs after so much time of non use !

Fitted the new radar mount and newly welded mast to take the nav lights ... looking very smart there now, and also just had the helm seat re-covered and here is a piccie of the fitting process ! the seat pad went on after :lol:

Re: Fairline Turbo 36 restoration

PostPosted: Fri Aug 03, 2018 7:17 pm
by TurboRoss
Forgot to mention , we are tackling the new windscreen deflectors on Monday so i'm looking forward to that, will post step by step pics on how that went !

Stay tuned ...

Ross

:lol: :lol: :lol:

Re: Fairline Turbo 36 restoration

PostPosted: Sat Aug 04, 2018 5:33 am
by Murv
Looking very nice!
Our helm seat certainly needs sorting out now, it broke off coming into Dover in a force 8.
Carried out a strong, but untidy repair and currently in Holland but it will need replacing when we get back.
Hope you're enjoying the weather!

Chris

Re: Fairline Turbo 36 restoration

PostPosted: Sun Aug 12, 2018 1:52 pm
by TurboRoss
Good day -

quick update whilst im waiting to commence the front cabin and saloon ive had a chance to fit my new wind deflector screens , made by Hampshire signs and plastics .

We've gone for a slight blue tint , and we had to drill our own holes which is never nice into that material but they fitted well .

Ross

:D

Re: Fairline Turbo 36 restoration

PostPosted: Sun Aug 12, 2018 3:02 pm
by Murv
Wow, that really sets the boat off nicely! 8)