Fairline Owners Club

Unfortunately most of my pics came out far too dark and blurred since the light had gone, the only pics that were ok are these ones ... The rubber seal simply pulls out. Stick a wide flat bladed screwdriver in between the metal frame and the rubber and push the rubber down and out. Gradually you wil...

Hi Andy, Ill try to confuse people a bit more :lol: You may have different anodes on the trim tabs and the legs! But, you can not mix anode types on the 'same circuit', since the trim tabs will not be electrically bonded to the engine they are not on the same circuit. Anodes are connected to the met...

assuming volvo 290 or 280 legs then the bar usually costs ~ ?15 and the collar ~?13 so about ?28 per leg. two of each used to cost ?35 in 2007 but obviously with rising metal prices they cost ~?60 last year. they are actually cheaper now in real terms (if you take out metal inflation over the same p...

Hi Andy, Ron Hale are really excellent, I ordered some zodiac slats and valves from them before. They are not too far which is also good. It looks like a great deal for ?830. Would be too small for me but they have got some good deals on 2008 models ... http://www.ronhalemarine.co.uk/superbasket/pro...

trend marine weren't any help so got frustrated and just pulled it apart :D Ill post some pics when Ive fitted the replacement. Basically the black rubber loop around the frame just pulls out, its not intentionally glued in but because the mesh is glued onto the rubber some glue gets through to the ...

since you want fully inflatable have you considered the zodiac cadet with air keel? 27kg 2.4m at ~?800 inc vat also some places have the 2.6m on sale for ?800. depends how you will use the tender. if you were to drive onto the beach often a rib would be preferable, a few sharp stones / rocks will ea...

Have you tried tek-tanks? I know they will make you a custom one to match the current, but it wont be off the shelf price.

http://www.tek-tanks.com/

I assume you've already seen the tv install topics on this forum?? For example 13th pic down on enterprise's targa 28 refit ... link ... http://www.fairlineownersclub.com/forum/viewtopic.php?t=1239 pic ... http://i91.photobucket.com/albums/k300/enterprise_01/LCDinstall.jpg also my topic on doing the...

For future reference the same latches they can be bought from ...

Roy Hopwood Limited
www.rhf.co.uk

the standard ones (M1-61-1) are ?7.66 + vat
lockable ones (M1-41-1) are 8.66 + vat
?9 + vat for post

Hi Neil, You might want to try asking on some Sealine forums (dont say you have a Fairline else ull get booed off, like I was on the Regal forum :D ) just say you're looking to buy your 1st boat a sealine and worried about the stress cracking and other faults that you've read about on the web. Im no...

guys read this post I think it answers both your Qs ??...

http://www.fairlineownersclub.com/forum ... ight=strip

happyboy, you mean the port battery? The stb battery is only used to start the stb engine and is not charged by the bat charger. The LEDs show the voltage on the port battery. Also the leds lighting up within minutes is ok. But if you say the PORT battery voltage remains at 12.0V and can not reach a...

Hi Adam, thanks, Ive ordered from rhf.co.uk it was cheaper than ECS ... Part Number: M1-61-1 (qty 1-49 pieces) ?7.66 each 7-10 W/Days Lead Time Description: Visible Flush Pull Latches Part Number: M1-41-1 (qty 1-49 pieces) ?8.66 each 7-10 W/Days Lead Time Description: Visible Flush Pull Latches Did ...

Good job!!

So you mounted the glomex on the port side but still ran the cable through the stb side arch right?

Did you manage to push the cable through without taking the panel off the inside of the radar arch?

I have these on my T30. I cant remember 100% but this discussion came up before with someone else and I think these davits were ordered from Fairline. If you look at the manufacturers sites (weaverindustries.com) they dont sell these so they might have been fabricated to order. Its definitely worth ...